We perform the following steps:

[shapanqqcceqd]

There are wires running from the control panel into the mechanism, it is important not to damage them.

Therefore, the control panel is suspended on the right side of the Samsung washing machine using a special service device.

To better understand the process, we recommend watching the video instructions.

Next, you need to pull out the service panel, it is located below the hatch door.

The screws that secure the panel are located on the sides of the Samsung washing machine. They are unscrewed from the panel using a Phillips screwdriver.

To separate the Samsung service panel from the case, you will need a little effort, so a plastic or wooden crowbar will come in handy.

Now, having opened the window door, we remove the clamp south africa telegram data and the cuff of the central panel. Then we unscrew the screws with a Phillips screwdriver, which fix the central panel.

we dismantle the central panel. It is carried out together with the hatch;
disconnect the door locking connector;
using pliers, loosen the hose clamp, then remove the hose and clamp;
remove the hatch cuff using a Phillips screwdriver;
remove the cuff clamp with a flat screwdriver;
remove the cuff from the drum.
To assemble the washing machine, use the same steps in the same sequence, only in reverse order.

How to replace a heating element in a washing machine
The need to replace the heating element is one of the most common breakdowns. The main reason is water hardness, which causes an increased amount of scale to form.

It is not difficult to carry out such repairs as replacing the heating element with your own hands. To do this, disconnect the washing machine from all communications - electricity and sewerage.

We check whether there is any water left in the mechanism. If yes, we drain it through the drain filter. We access the heating element.